FlyFish Flash & Volador
New FPV manufacturer on the block
The products they make (currently motors, antennas, and frames) are pretty good from everything I heard. A lot of amazing pilots that I know really like the motors, and had direct feedback when it came to making them. The antennas seem to be pretty average but not bad, and we can never have enough. Their frames are currently the newest options in their lineup, but similar to the motors, they are well-made and truly tested
Flash motors
Coming in two color options, black & silver, and silver & purple. IMO a really nice niche to hit, both for people looking for stealth motors, as well as people looking to add a pop of color. Color variations of the silver ones are also planned, for blue and gold as the accents
They also offer replacement bells for every motor they sell, so you don’t have to pay the full price if you just damage the bell. Though this is pretty unlikely, as they are pretty durable and run smoothly even after heavy crashes from what I heard.
Currently offered sizes are:
2207
Available options:
Specs
KV
1850, 1950, 2005, 2750Construction
7075 Aluminum bells
N52HS Magnets
NMB bearings
Weight
34.2g (including 150mm wires)Mounting
16x16Price
$20.90/21.90
2306
Available options:
Specs
KV
1750, 2550Construction
7075 Aluminum bells
N52HS Magnets
NMB bearings
Weight
32.2g (including 150mm wires)Mounting
16x16Price
$20.90/21.90
1404
Available options:
Specs
KV
4500Construction
7075 Aluminum bells
N52HS Magnets
NMB bearings
Weight
8.7g (with short wire)Mounting
9x9Price
$14.99
2806.5
Available options:
Specs
KV
1350, 1850Construction
7075 Aluminum bells
N52HS Magnets
NMB bearings
Weight
48g (with short wire)Mounting
19x19Price
$26.90
Volador frames
Slick aluminum-on-carbon frames with fancy colors, reasonable pricing, 3d milled carbon, and integrated XT60 holders
Volador VX5/VD5
Not your typical boxy frames, they have full 7075 aluminum cam cages for a really nice look and all-round camera protection, and durable T700 carbon. Coming in a Squash-X and Deadcat configurations for freestyle and cinematic uses. Heavier than usual, but with the thick carbon plates and 6mm arms that are extra thick in the center, it makes sense
Available options:
Volador VX5 Black/Tropical Mix
Volador VD5 Black/Tropical Mix
Specs
Material
7075 Aluminum and T700 CarbonCarbon Plates
- 6mm arms
- 2.5mm top plate
- 3mm middle plate
- 3mm bottom plate
Sizing
- Camera: 19x19 / 20x20
- Stack: 20x20/30x30 + 20x20/25x25
- Prop: 5.1”
- Wheelbase: 225mm
Weight
199.5g VX5, 203.5g VD5 (including TPU parts)Price
$64.90 black TPU
$69.90 (nice) multicolor “Tropical mix” TPU
Volador VX6/VD6
Very similar in principle to the 5” frames, but with longer 6” arms for mid-range shots, and/or for comfortably carrying slightly heavier cameras (think heavy GoPro 10/11). Could also use 5.5” props as a nice in-between, as the extra 1” of the arms does not add much weight
Available options:
Volador VX6 Black/Tropical Mix
Volador VD6 Black/Tropical Mix
Specs
Material
7075 Aluminum and T700 Carbon
Carbon Plates
- 6mm arms
- 2.5mm top plate
- 3mm middle plate
- 3mm bottom plate
Sizing
- Camera: 19x19 / 20x20
- Stack: 20x20/30x30 + 20x20/25x25
- Prop: 6.1”
- Wheelbase: 268mm
Weight
211.1g VX6, 216.1g VD6 (including TPU parts)
Price
- $69.90 (nice) for black TPU
- $74.90 for the multicolor “Tropical mix” TPU
Osprey antennas
I mean they’re antennas, not much to write about. I’ve asked around, and the omnis seem pretty durable. They come in multiple different lengths, sizes, polarizations and connectors for all of the different ways you’d want to mount them. They also have a DJI faceplate directional antenna for DJI FPV Goggles V1 and V2. All of their antennas are available here